Ladies and gentlemen, sharpen your blades…
it’s pruning time! With a little reading, a careful assessment of your trees and the right tools, you really can do it on your own!
As a rule of thumb,
You can place fruit trees into three different pruning categories: the ‘open centre’, the ‘central leader‘ and the ‘espalier’ form. The techniques needed to treat trees/shrubs in these categories vary from one another, so learn what you’re working with before you begin.
Open up centres
Apples, pears, and plums should have their centres opened up to allow more sun and air to penetrate. This technique is called ‘open-vase’ pruning, and it allows fruit to develop on the inside of the tree, on the tips and on the outward growing branches. For this type of pruning, simply choose to retain three to five dominant branches radiating out from the main stem. These branches should be five or six feet off the ground, allowing you to comfortably walk or work under the tree without hitting your head. Once you have determined which branches you are going to keep, cut out any other branches left in the centre, as well as any inward growing ones. Next, cut out all the upward growing branches, leaving the tree looking like a very open ‘Y’. The remaining branches should be pruned back each year by approximately two feet, keeping this ‘Y’ formation intact.
How to minimalize mass water sprouts
A heavy pruning each year, unfortunately, results in a mass of water sprouts shooting out in all directions. To minimize this problem, once you have developed the tree’s ‘open-vase’ shape, you should switch to a training program rather than a pruning program. Training simply means weighing down the branches with soil-filled plastic bags to encourage growth in a horizontal pattern. This technique will minimize the need for massive pruning and greatly reduce the number of water sprouts you have to deal with each year. You will also find that these horizontal branches will be your best fruit-bearing stems. You will still have to cut them back by 18 to 24 inches each dormant season to keep the tree’s size in check, but this type of pruning will result in a tree that is far more productive and much easier to maintain.
Sweet cherries
Sweet cherries present a slightly different problem. They are perhaps the most vigorous of all fruit trees and resist any attempt to be pruned in an ‘open-vase’ shape. Sweet cherries tend to have a very strong stem or leader, and because of that, they require ‘central leader’ pruning.
‘Central leader’
Pruning simply means cutting back the main stem each year to control the rate of growth and at the same time, cutting back the outward growing branches even further, leaving an overall pyramidal form. If there are two or three strong central stems, it may be a good idea to eliminate all but one to avoid competition and to thin out the tree. The outward growing branches should be pruned back at a 45 degree angle. Next season the central leader may develop two or three new branches. The one that grows into the strongest and most upright main stem should be treated as your central leader, and the other remaining stems can be removed or left, depending upon their growth habit.
If they can be trained in an outward direction, simply cut them back next year on a 45 degree angle along with the other branches. Try, however, not to let the centre of the tree become cluttered. If you maintain the outside branches at a 45 degree angle each year, the result will be a tree which is fairly open and easy to maintain, and one which will stay within reach of your ladder. Probably one of the best root stocks for cherry trees in a smaller home garden is the dwarf, self-fertile varieties of Gisela root stock from Europe.
‘Espalier’
Pruning is primarily done on trees such as peaches, nectarines and apricots. To minimize disease problems such as ‘peach leaf curl’, these trees should be grown against the south or west side of a building. Very compact apple and pear varieties are usually grown in the same manner, except out in the open against a fence or other support device.
Remove frontward and backward growing branches
All that is necessary here is the removal of frontward and backward growing branches which don’t conform to an espalier formation. The most common problem is leaving too many branches on the tree, which causes over-production and simply clutters up the tree. Choose three to five sets of the strongest sideward-growing branches and remove the rest. If these branches have a tendency to grow upward, use a long bamboo pole as a T-bar to hold the branches in place. You will have to be quite ruthless in your pruning to maintain this very strict form. Most branches radiating off this framework will have to be removed, leaving many spurs and fruit buds along each stem.
If you have questions
You will probably run into a hundred questions once you start pruning. Many good, easy-to-understand books and online videos are available. Good pruning books will have excellent diagrams showing how your tree should look after each progressive season, and as you know, pictures are worth a thousand words. Should you go the video route, just make sure you’re getting your information from a reputable source.
Pruning fruit trees is actually a lot of fun. When we did an in-store survey a few years back, we asked the question ‘What’s your favourite gardening activity?’, and pruning was the winner by a long shot! You will learn a little more from each pruning season and in just a few years, you will quickly develop a real sense of how it is done.
For additional information, check out our previous blog regarding using the right pruning tool for the job, what to watch for when you’re cutting, and the importance of cleaning your tools.